Why Your GE Stove Burner Won't Turn Off

Troubleshoot Why Your GE Stove Burner Won’t Turn Off

Care to share?

Professional chefs and amateurs alike praise GE stoves for their even cooking and precise heat control. The only potential drawback for any stovetop is safety, and one of the scariest examples of that is when your GE stove burner won’t turn off. This is a fairly common issue though, and we’ll explain how to diagnose and repair the problem yourself.

Why Your GE Stove Burner Won’t Turn Off

It’s both frightening and confusing when you find that your GE stove burner won’t turn off. The good news is that there are only a few potential sources of the problem. Here’s what you should look for:

Surface Element Switch Failure

The first thing you should check for when your GE range surface element won’t turn off is the element switch. They’re known to fail over time, and they can be easily tested and replaced by a novice.

How the Switch Works

Each of your stove’s surface elements is controlled by a knob attached to a control switch. The switch’s job is to send voltage to the element when you turn the heat on.

More importantly, though, it’s supposed to cut the voltage off when the desired temperature has been reached. This prevents the surface element from getting too hot or too cold, providing steady, even cooking temperatures.

What Can Go Wrong

After repeated uses, surface element control switches can start to wear out. One of the results from this deterioration is that the electrical contacts within the switch can fuse together. That means the switch can no longer turn on and off based your desired settings, and instead is stuck on full heat.

How to Test the Switch

The easiest way to find out if you have a defective control switch is to use another one of your stove elements. If your model has another burner that’s the same size, swap out the problem element and test that burner again. If the problem persists and the heat won’t turn off, you’ll need to install a new switch.

Surface Element Damaged

If there’s nothing wrong with your control switch, then the surface element must be why your GE stove burner won’t turn off. It’s the coil that heats up and gets red when you turn on your stove. Thankfully though, they’re simple to test, cheap to replace, and easy to install.

How the Element Works

When everything is working correctly, you select a heat setting with the control knob, and the switch sends voltage to the element. The electricity passing through the element then causes it to heat to your desired temperature.

What Can Go Wrong

Over time, surface elements can start to wear out, especially if you don’t clean and maintain your stove top regularly. If a surface burner shorts out, it can prevent the control switch from shutting off the voltage, leaving the burner on full blast.

How to Test an Element

Whether your unit has an exposed surface element or a hidden radiant element, start by inspecting it for visible damage or signs of burning. If it looks good, use a multimeter to test for continuity. If you find that it does have continuity between the terminals and the coil surface, the element has shorted out and needs to be replaced.

Following these instructions should help you figure out why your GE stove burner won’t turn off. For expert stove repair in your area, call the Appliance Repair Specialists today!

$20 Off Labor Coupon

Sign up to get your new subscriber coupon and start receiving content you’ll love.

Text REPAIR for $20 Off

Text the word REPAIR to (844) 527-0737, and we'll give you $20 off your first repair.

Text REPAIR to
(844) 527-0737 for $20 Off